| Марка | Debem |
| Продукт | MICRCLR00669AA4 |
| Вътрешен код | IMP3353898 |
| Tегло | 1 |
Моля, изпратете ни вашето запитване по имейл, за да получите цена и време за доставка за Debem - MICRCLR00669AA4 . Можем да ви посъветваме и за други номера на модели. Опитваме се да намерим най-добрата цена и време за доставка за вас на германския промишлен пазар.
Продаваме само нови и оригинални продукти.
BOXER150 HYTREL DIAPHRAGM
BOXER150 SANTOPRENE DIAPHRAGM
въздушна помпа двойна диафрагма
Diaphragm Pump
(Ex-Stecker, 3-polig)
(Ex-Steckdose, 3-polig)
consisting of universal motor and pump station 10 Pieces of Universal motor JP-180, 230V, 50Hz, 600W, IP24 A - On / Off switch, 5m cable with plug, Overcurrent protection switch with Unterspannungsausloessung 10 pieces of pump station polypropylene, 1000mm long, 41mm diameter sealless execution, Tauchrohrlaenge 1000mm, Outside - dip tube - diameter 41mm, Hastelloy - Shaft 2.4610 Connection thread G 1 1/4 hose connection 1 " 20 meters PVC - hose, 1 "(10x2meters) 20 pieces hose clamps, stainless steel 10 pieces nozzle, polypropylene, 1 " 10 pieces Wandaufhaengung, painted steel
FLANGED NUT
Вътрешната и външната мембрана Hytrel / PTFE за по-горе помпата
T30 PNEUMATIC EXCHANGER
pneumatische membranpumpe Forderleistung 30L?min Lebensmittel und Flussigseifentauglich
BOXER 50 PP MEM.HY+PT/INOX/INOX/EPDM, SUPPLY WITH INSTRUCTIONS MANUAL
Резервни Части Информация за устройството JP-800.91 PMTTPT (Серия-NR. SDB 72105)
(Set Universalmotor JP-400 -EX, 230 Volt, 50 Hz, 550 Watt, IP 54: Pumpwerk, 2 St. Schlaucheinbindungen, 2 mtr. Vielzweckchemieschlauch, Zapfpistole, Potentialausgleichskabelset)
(Druckluft-Membranpumpe JP-800.150 (DEBEM BOXER 100), Gehäuse: Polypropylen, Membranen: HYtrel+PTFE, Kugeln: PTFE , Kugelsitze: PP, O-Ringe: PTFE)
(Druckluft-Membranpumpe JP-800.150 (DEBEM BOXER 100), 1", Gehäuse: Aluminium, Membanen: HYtrel+PTFE, Kugeln: PTFE, Kugelsitze: PE-UHMW, O-Ringe: PTFE)
Flow rate max. 220 l / min at 7 bar Housing: PP Diaphragm: Hytrel (air side) + PTFE (medium side) Balls: PTFE Ball seats: PP O-rings: PTFE
Druckluftmembranpumpe JP-800.5 CONDUCT 5 l/min max. 7 bar, Zulassung für Ex-Zone 1 Gehäuse: PP + Kohlefaser Membrane: NBR (Luftseite) / PTFE (Mediumseite) Kugeln: Pyrex (Glas) Kugelsitze: PPSV (Ryton) O-Ringe: PTFE
Förderleistung max. 50 l/ min bei 7 bar Gehäuse: PP Membrane: Hytrel (Luftseite) + PTFE (Mediumsseite) Kugeln: PTFE Kugelsitze: PP O-Ringe: Viton
2 " Approval for Ex Zone 2 PP housing Diaphragm: Hytrel (airside) / PTFE (medium) Balls: Stainless steel Ball seats: PP O rings: EPDM (Debem Pump IB502P-HTTPD)
Air задвижвани мембранни помпи